XPeRT
Layer activators · Keysets
Layer activators
shift_rightshift_leftKeysets
Layer activators · Keysets
Layer activators
shift_rightshift_leftKeysets
Layer activators · Keysets · Notes
Layer activators
shift_rightshift_leftKeysets
Notes
XPeRT is a transitional keyboard layout patented around 2002 or 2003 that claims to be a faster alternative to QWERTY due to its greater emphasis on alternation (though not as high as Dvorak) and higher index and middle finger usage. Unusually among alt layouts, the creator sold a “software kit” to install the layout for US$29.
Install
Section titled “Install”Kanata is a keyboard remapper that works on Windows, macOS, and Linux.
Install Kanata by following “Step 1: Set Up Kanata” in Nova’s Kanata setup guide:
Download the Kanata config file for the desired layout:
Make sure you know how to type your computer password using XPeRT.
Run Kanata with the downloaded config file and make sure the layout works as you expect:
kanata --cfg path/to/config.kbdTo have XPeRT activate whenever your computer starts up, follow the instructions to “Automatically start Kanata”:
There are two downloads available for macOS:
| Method | Admin Required | Notes |
|---|---|---|
| Native | Optional | Does not require 3rd party key remapping software. Admin is required to install for all users and use on first login. |
| Karabiner-Elements | Yes | Requires 3rd party key remapping software, including the installation of a Driver Extension. Allows for remapping of only specific keyboards. |
Download the .keylayout file for the desired layout:
Install the
.keylayoutfile:Copy the downloaded
.keylayoutfile to~/Library/Keyboard Layouts. Create the folder if it does not exist.Copy the downloaded
.keylayoutfile to/Library/Keyboard Layouts.Restart macOS.
Open System Settings.
Go to Keyboard → Text Input → Input Sources → Edit… and add your new XPeRT layout.
Press the “+” button at the bottom left.
Search for “XPeRT,” select your new layout, and press Add.
Install Karabiner-Elements:
Download the Karabiner rule file for the desired layout:
In Karabiner-Elements Settings, go to “Complex Modifications,” then press “Add predefined rule”at the top.
Make sure you know how to type your computer password using XPeRT.
Find the imported section named for the layout you downloaded, followed by “via Layouts.Wiki”, and enable the rule you want.
“All keyboards” remaps XPeRT onto all keyboards while connected to this computer. Select this reason unless you want to exclude some keyboards from remapping.
“Built-in keyboard only” remaps your device's built-in keyboard, as well as any other keyboard for which “Treat as built-in keyboard” (under the “Devices” section) is enabled. Select this option if you plan to map XPeRT onto an external keyboard using custom firmware.
To use XPeRT on the password entry screen before logging in, follow the official instructions: